We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Bridge elimination device.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Bridge elimination device - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Bridge elimination device Product List

1～3 item / All 3 items

Displayed results
The bridge of titanium oxide has been eliminated.

The bridge of titanium oxide has been eliminated.

Economical and easy to install! Can be used in various applications, even with troublesome powders like TiO2!

Among various powders with poor fluidity, titanium dioxide is a troublesome powder. This time, we are addressing issues around the vertical piping (300φ, 1200L) to the screw feeder. At the short pipe section just above the screw, a bridge (or rat-hole formation) occurred, and before the installation of this equipment, the short pipe was hammered from the outside each time this happened. However, it has now become stable in supplying titanium dioxide to the screw. (There were no signs of adhesion or blockage in the vertical piping of 300φ from the beginning.) This equipment is economical and easy to install. It is also used in various applications for troublesome powders like TiO2, as in this case. Please feel free to consult us regarding any questions or your usage conditions. 【Overview】 ■ Installation location: Short pipe at the screw feeder inlet (200φ×250L) ■ Model: Brody Disk Mini * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous case studies, which you can check via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment
  • Bridge elimination device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0333 Eliminate the paper dust bridge.

0333 Eliminate the paper dust bridge.

Elimination of bridges in the dust collection hopper generated during the cutting of various types of paper.

We would like to introduce a case where the bridging in a powder storage hopper, which occurs when cutting various types of paper with a blade, was resolved using a "Brodisk." The customer requested to borrow the Brodisk, so we lent them four units of the standard model BD-15S-B. After installing one unit on each side of the hopper for testing, the bridging was easily resolved, and subsequently, they adopted this Brodisk along with the controller. [Overview] ■ Hopper dimensions: 600×600 * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment
  • Bridge elimination device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resolving the bridge of the extruder material hopper.

Resolving the bridge of the extruder material hopper.

An example of installing two Brodisk Minis at different heights, for a total of four, near the discharge area.

We received an inquiry about frequent bridging issues with test equipment for development, and this is a case where we found a solution. Since there was a request to actually test the product, we promptly lent the necessary quantity of the product (Broad Disk Mini). Good results were obtained immediately, and they have since adopted this equipment and controller. 【Overview】 ■ Target Equipment: Extruder Raw Material Hopper 500φ (Discharge Diameter 60φ) ■ Target Material: PP Ground Material (a few mm, including powder) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous implementation examples. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment
  • Bridge elimination device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Bridge elimination device

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.